Analog and Digital I/O Wireless Bridge

Analog and Digital I/O Wireless Bridge

The Analog and Digital I/O (ADIO) Wireless Bridge products are designed to act as a wireless cable replacement for measuring and collecting Analog or Digital input signals. The bridges have four channels that can be configured as either digital or analog inputs or output. In Analog mode the bridges can be accept 0-10V or 4-20mA inputs. They can replicate the inputs as an a 0-10V output or as a digital data stream.

When channels are set as digital inputs they can accept a 0-5V or a 0-3.3V logic signal. Digital outputs can output either voltage level. The ADIO Wireless Bridge has a screw terminal connector for signals and a micro USB port to configure the device and port settings. The ADIO Wireless Bridge is available in three different options depending on range requirements.

It is possible to mix and match wireless bridge products. The ADIO Wireless Bridge will communicate with the RS-232, RS-485 and USB Wireless Bridge products that share the same radio configuration. By using an ADIO Wireless Bridge at point A and a RS-232 Wireless Bridge at point B, the wireless bridges can act as an Analog to RS-232 data stream over-the-air converter. Different serial output formats are available.

The ADIO Wireless Bridge ships with an RPSMA 115mm articulating antenna and 12 VDC wall adapter power supply.

Download Data Sheet

Download User Manual

ADIO Wireless Bridge Part numbers

WB-ADIO-24LP-A
  • 2.4 GHz 6.3mW: Ranges of up to 200 ft. indoors, over 4000 ft. outdoor line-of-sight.
  • Compatible with other 24LP & 24HP Datawave bridges.
  • Compatible with Digi XBee S2C 802.15.4 modules
WB-ADIO-24HP-A
  • 2.4 GHz 63mW: Ranges of up to 300 ft. indoors, over 2 miles outdoor line-of-sight.
  • Compatible with other 24LP & 24HP Datawave bridges.
  • Compatible with Digi XBee S2C 802.15.4 modules
WB-ADIO-09SX-A
  • 900 MHz 1 Watt: Ranges of up to 300m indoors, over 10 miles urban line-of-sight.
  • Compatible with other 09SX Datawave bridges.
  • Compatible with Digi XBee 09SX modules.
Product Features
  • 7-30VDC input
  • 4 fully configurable channels.
  • Adjustable RF output power
  • Configurable channels and addressing
  • Compatible with other wireless bridge products
  • Bidirectional Communication
  • Over-the-air compatible with Digi XBee
Pages

Grid List

Pages

Grid List